13
Chapter 1: Introduction
Connector Description
T-SGPIO1 Serial_Link General Purpose I/O (GPI/O) port
USB0/1, USB2/3 Back Panel Universal Serial Bus (USB) 3.0 ports
USB4/5 Internal USB 3.0 header with two USB (USB4/5) connections supported for front access
USB6 Type A USB 3.0 header for front access
VGA VGA port
LED Description Status
LE1 Unit Identifi er (UID) LED Solid Blue: Unit Identifi ed
LE2 Onboard power LED Solid Green: Power On
LEDM1 BMC Heartbeat LED Blinking Green: BMC normal
To Next Page
Loading...
