Super X11DPi-N(T) User's Manual
106
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
Key Management
Provision Factory Default Keys
Select Enabled to install all manufacturer default keys for the following system security
settings. The options are Enabled and Disabled.
Install Factor Default Keys
Select Yes to install all manufacturer defaults for the following system security settings. The
options are Yes and No.
Enroll EFI Image
Select this item and press <Enter> to select an EFI (Extensible Firmware Interface) image
for the system to operate in Secure Boot mode.
Save All Secure Boot Variables
This feature allows the user to set and save the secure boot key variables specifi ed by the
user.
Secure Boot Variables
Secure Boot Variable/Size/Key#/Key Sources
Platform Key (PK)
This feature allows the user to enter and confi gure a set of values to be used as a platform
fi rmware key for the system. This set of values also indicate the size, the keys numbers,
and the key source of the Platform Key. The options are Save to File, Set New, and Erase.
Key Exchange Keys
This feature allows the user to enter and confi gure a set of values to be used as a Key-
Exchange-Keys for the system. This set of values also indicate the size, the keys numbers,
and the key source of the Key-Exchange-Keys. The options are Save to File, Set New, and
Erase.
To Next Page
Loading...
Need help?
General
