15
Chapter 1: Introduction
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specifi cations for proper CPU TDP sizing.
Note 2: For IPMI confi guration instructions, please refer to the Embedded IPMI Con-
fi guration User's Guide available at http://www.supermicro.com/support/manuals/.
Note 3: It is strongly recommended that you change BMC log-in information upon ini-
tial system power-on. The manufacture default username is ADMIN and the password
is ADMIN. For proper BMC confi guration, please refer to http://www.supermicro.com.
To Next Page
Loading...
