3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X11DPH-i/T(q) motherboard.
About This Motherboard
The Super X11DPH-i/X11DPH-T/X11DPH-Tq motherboard supports dual Intel® Xeon
81xx/61xx/51xx/41xx/31xx Series processors (Socket P) with the TDP (Thermal Design
Power) of up to 205W and UPI (UltaPath Interconnect) of up to 10.4 GT/s. With the
Intel C622/C624/C628 PCH built-in (Note below), this motherboard supports three PCI-E 3.0
x16 slots, four PCI-E 3.0 x8 slots, two PCI-E 3.0 x4 M.2 slots, ten SATA3 ports, seven USB 3.0
connections, and up to 2TB of LRDIMM/RDIMM/NVDIMM DDR4 ECC 2666/2400/2133 MHz
memory in 16 memory slots. The X11DPH-i/T(q) provides maximum system performance,
system cooling, and I/O expansion capability currently available on the market. This
motherboard is optimized for general-purpose, high-performance computing, and is ideal for
use as a storage server. Please note that this motherboard is intended to be installed and
serviced by professional technicians only. For processor/memory updates, please refer to our
website at http://www.supermicro.com/products/.
Note: Intel C622 is used for X11DPH-i, C624: is for X11DPH-T, and C628: for X11DPT-
Tq.
To Next Page
Loading...
Need help?
General
