44
Super X11DPi-N(T) User's Manual
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
3.3V Stby
Ground
19
X
Ground
X
3.3V Stby
20
12
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
3.3V
OH/Fan Fail LED
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to
display network activity. Refer to the table below for pin defi nitions.
1. NIC2 LED
2. NIC1 LED
3. HDD LED
LAN1/LAN2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9 NIC 2 Activity LED
11 NIC 1 Activity LED
1
2
3
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable to pin 14 to
show hard drive activity status. Refer to the table below for pin defi nitions.
HDD LED
Pin Defi nitions (JF1)
Pins Defi nition
13 3.3V Stdby
14 HDD Active
To Next Page
Loading...
