Supermicro X11DPT-PS - SATA 3.0 and sSATA 3.0 Ports

43
Chapter 2: Installation
P5 S20
S1
BIOS
LICENSE
MAC CODE
BAR CODE
P1-DIMMF1 P1-DIMME1 P1-DIMMD1 P1-DIMMD2
P2-DIMMC1 P2-DIMMB1 P2-DIMMA1
P2-DIMMA2
P2-DIMMD2
P2-DIMMD1
P2-DIMME1
P2-DIMMF1
P4
JHS1
JPME1
JBT1
FAN3
SXB4
SXB1
UID_LED1
JUIDB1
JSIOM1
SXB3_1
SXB2
SXB3_2
I-SATA5
JCPLD1
JRK1
BT1
JTPM1
JSDCARD1
PHY
I-SATA4
HDD_LED
I-SATA0~3
S-SATA0~5
IPMI_LAN
CPU1 PCI-E 3.0 X16
CPU2 PCI-E 3.0 X8
CPU1 PCI-E 3.0 X8
CPU2 PCI-E 3.0 X16
BMC_HB_LED
BATTERY
COM1
BIOS
BMC
BMC SD CARD
SIOM:CPU1 PCI-E 3.0 X16
CPU1
CPU2 PCI-E 3.0 X16
P1-DIMMA2
P1-DIMMA1
P1-DIMMB1 P1-DIMMC1
CPU2
X11DPT-PS
Rev. 1.10
JVRM1/JVRM2
PCH
JWD1
VGA
USB 0/1 (3.0)
I-SATA 3.0 and S-SATA 3.0 Ports
The X11DPT-PS has six I-SATA 3.0 ports (I-SATA0-3, I-SATA4/I-SATA5) and six S-SATA
(S-SATA0-5) on the motherboard. These SATA ports are supported by the Intel C621 chipset.
I-SATA0-3 are supported on SXB2, and S-SATA0-5 are supported on SXB1. I-SATA4/ I-SATA5
can be used with Supermicro SuperDOMs, which are yellow SATA DOM connectors with
power pins built in, and do not require external power cables. Supermicro SuperDOMs are
backward-compatible with regular SATA HDDs or SATA DOMs that need external power
cables. All these SATA ports provide serial-link signal connections, which are faster than the
connections of Parallel ATA.
SATA 3.0 Port
Pin Defi nitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
1
2
1. I-SATA0-3
2. I-SATA4 (SuperDOM)
3. I-SATA5 (SuperDOM)
4. S-SATA0-5
4
3