EasyManuals Logo

Supermicro X11SSH-F User Manual

Supermicro X11SSH-F
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
X11SSH-F/-LN4F User Manual
84
DMI VC1 Control
Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and
Disabled.
DMI VCm Control
Use this feature to enable or disable the DMI Virtual Channel map. The options are Enabled
and Disabled.
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and L1.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Disabled and Enabled.
DMI De-Emphasis Control
Use this feature to congure the De-emphasis control on DMI. The options are -6dB and
-3.5dB.
PEG Port Conguration
CPU SLOT6 PCI-E 3.0 X8 (IN x16)
SLOT6 Max Link Speed
This feature allows the user to select PCI-E support for the device installed on SLOT6.
The options are Auto, Gen 1, Gen 2, and Gen 3.
SLOT6 Max Payload Size
Use this feature to select the PEG0 maximum payload size. The options are Auto, 128
TLP, and 256 TLP.
SLOT6 Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"
or "-" on your keyboard to change this value. The default setting is 75.
SLOT6 Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x, 0.1x, 0.01x, and 0.001x.

Table of Contents

Other manuals for Supermicro X11SSH-F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X11SSH-F and is the answer not in the manual?

Supermicro X11SSH-F Specifications

General IconGeneral
IPMI LAN (RJ-45) portYes
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Maximum UDIMM memory64 GB
Number of DIMM slots4
Supported DIMM module capacities4GB, 8GB, 16GB
Memory voltage1.2 V
Supported memory typesDDR4-SDRAM
Supported memory clock speeds1600, 1866, 2133 MHz
BIOS typeAMI
ACPI version4.0
BIOS memory size16 Mbit
RAID levels0, 1, 5, 10
Supported storage drive interfacesSATA III
On-board graphics card modelAspeed AST2400
Processor socketLGA 1151 (Socket H4)
Intel Xeon seriesE3-1200
Processor manufacturerIntel
Processor thermal power (max)80 W
Wi-FiNo
Ethernet interface typeGigabit Ethernet
Number of SATA III connectors8
Trusted Platform Module (TPM) version1.2
Motherboard chipsetIntel® C236
Motherboard form factormicro ATX
Weight and Dimensions IconWeight and Dimensions
Width224 mm

Related product manuals