14
X11SSW-F User Manual
Note: The table above is continued on the next page.
Motherboard Features
CPU
• Intel® Xeon® E3-1200 v5 and 6th Gen Core™ i3, Pentium and Celeron processors in an LGA1151 (H4) socket. 80W
max TDP.
Memory
• Four (4) 288-pin DIMM slots support up to 64 GB of SDRAM 72-bit DDR4 unbuffered ECC 2400/2133/1866/1600/1333MHz
memory.
DIMM Size
• 16GB, 8GB, and 4GB, up to 64GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
• Intel® PCH C236
Expansion Slots
• One (1) SMC-Proprietary WIO-R slot (JSXB2)
• One (1) SMC-Proprietary WIO-L slots (JSXB1A/1B/1C)
• One (1) M.2 NGFF connector [supports PCIe 3.0 x4 (32 Gb/s)]
Network
• Intel i210 AT Gigabit Ethernet Controller for LAN1/LAN2
Baseboard Management Controller (BMC)
• ASpeed AST 2400 Baseboard Controller (BMC) supports IPMI 2.0
• One (1) dedicated IPMI LAN located on the rear IO back panel
Graphics
• Graphics controller via ASpeed 2400 BMC
I/O Devices
• Serial (COM) Port
• One (1) serial port on the rear I/O panel (COM1)
• One (1) front accessible serial port header (COM2)
• SATA 3.0
• Six (6) I-SATA 3.0 ports (I-SATA2-7)
• Two (2) SuperDOM connectors (I-SATA2 & I-SATA3)
• RAID (PCH) • RAID 0, 1, 5, and 10
Motherboard Features
To Next Page
Loading...
