16
X11SSW-TF/-4TF User Manual
Note: The table above is continued on the next page.
Motherboard Features
Peripheral Devices
• Two (2) USB 2.0 ports on the rear I/O panel (USB 0/1)
• Two (2) front accessible USB 2.0 headers (USB 2/3, 4/5)
• Two (2) USB 3.0 ports on the rear I/O panel (USB 6/7)
• One (1) USB 3.0 Type-A header (USB 8)
• One (1) front accessible USB 3.0 header (USB 9/10)
BIOS
• 128Mb AMI BIOS® SPI Flash BIOS
• Plug and Play (PnP), Riser Card auto-detection, dual boot block, DMI 3.0, ACPI 3.0+, USB Keyboard, BIOS rescue hot-
key, and SMBIOS 2.7+
Power Management
• ACPI power management
• CPU fan auto-off in sleep mode
• Power button override mechanism
• Power-on mode for AC power recovery
System Health Monitoring
• Onboard voltage monitors for CPU cores, +3.3V, +5V, +12V, +5V AUX, +3.3V Stby, VBAT, VSA, Memory, PCH temperature,
and system temperature
• CPU 3+2-phase switching voltage regulator
• CPU/System overheat control
• CPU Thermal Trip support
Fan Control
• Fan status monitoring with rmware 4-pin fan speed control via IPMI interface
• Low noise fan speed control
System Management
• PECI (Platform Environment Conguration Interface) 3.1 support
• Intel® Node Manager
• IPMI 2.0 with KVM support
• SuperDoctor® 5, Watch Dog, NMI
• Chassis Intrusion header and detection
• Power supply monitoring
LED Indicators
• CPU/system overheat LED
• Power / suspend-state indicator LED
• Fan failed LED
• UID / Remote UID
• HDD activity LED
• LAN activity LED
To Next Page
Loading...
