Supermicro X13SCW-F - Secure Boot Mode; CSM Support; Restore Factory Keys; Reset to Setup Mode

Super X13SCW-F User's Manual
110
Secure Boot
Select Enabled to congure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CSM Support
If this feature is set to Enabled, legacy devices will be supported by the system. The options
are Disabled and Enabled.
Restore Factory Keys
Select Yes to restore manufacturer default keys used to ensure system security. The options
are Yes and No. Selecting Yes will reset the system to Deployed mode.
Reset to Setup Mode
This feature resets the system to Setup Mode. The options are Yes and No.
Enter Audit Mode (Available when "Secure Boot Mode" is set to
Custom)
Select Ok to enter the Audit Mode workow. It will result in erasing of Platform Key (PK)
variables and reset system to the Setup/Audit Mode.
Key Management (Available when "Secure Boot Mode" is set to
Custom)
The following information is displayed.
• Vendor Keys
Factory Key Provision
Select Enabled to install provision factory default settings after the platform reset while the
system is in the Setup Mode. The options are Disabled and Enabled.
Restore Factory Keys
Select Yes to restore manufacturer default keys used to ensure system security. The
options are Yes and No. Selecting Yes will reset the system to Deployed mode.