Supermicro X13SCW-F - Quick Reference Table; Connector

12
Super X13SCW-F User's Manual
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable Pins 1–2 (Enabled)
JPL1, JPL2 LAN1, LAN2 Enable Pins 1–2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1–2 (Normal)
LED Description Status
LE6 Power Ready LED
Solid Amber: Standby
Solid Red: Power Failed
Solid Green: Power On
LEDM1 BMC Heartbeat LED Blinking Green: BMC Normal
LEDMCU1 Micro Control Unit (MCU) Heartbeat LED Blinking Green: MCU Normal
LEDPWR Onboard Power LED Solid Green: Power On
UID-LED Unit Identier (UID) LED Solid Blue: Unit Identied
Connector Description
BT1 Onboard Battery
COM1, COM2 COM Port, COM Header
FAN1–FAN6 CPU/System Fan Headers
IPMI_LAN Dedicated IPMI LAN Port
I-SATA0–I-SATA7 Intel
®
PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
JBPNI2C1 4-pin BMC External I
2
C Header (for a BPN-NVME5-LA15-S4 backplane)
JF1 Front Control Panel Header
JIPMB1 4-pin BMC External I
2
C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JNVME1 NVMe MCIO Connector x8 (two PCIe 4.0 x4 via PCH)
JPI
2
C1 Power I
2
C System Management Bus (SMB) Header
JPW1 24-pin ATX Power Supply Connector
JPW2 8-pin Power Connector
JSEN1 Inlet Sensor Header
JSXB1A, JSXB1B, JSXB1C Supermicro Proprietary WIO_L (Left) Add-On Card Slots
JSXB2 Supermicro Proprietary WIO_R (Right) Add-On Card Slot
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
JUIDB1 Unit Identier (UID) Switch
LAN1, LAN2 1GbE LAN Ports
M.2-C
M.2 Slot for CPU PCIe 4.0 x4
(Supports M-Key 2280/22110 FF)
Note: The table above is continued on the next page.