25
Chapter 2: Installation
1. Remove the plastic protective cover from the load plate.
2. Gently push down the load lever to release and lift it, then lift the load plate to open it
completely.
3. Use your thumb and your index nger to hold the CPU. Align the small triangle maker
and notches on the CPU to the corresponding triangle maker and notches on the CPU
Lever lock
CPU notch
CPU load
bracket notch
Pin 1
load bracket. Once aligned, carefully lower the CPU straight down into the socket. (Do
not drop the CPU on the socket, or move it horizontally or vertically.)
4. Do not rub the CPU against the surface or against any pins of the socket to avoid
damaging the CPU or the socket.
To Next Page
Loading...
