3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians, and knowledgeable end users.
It provides information for the installation and use of the X13SCW-F motherboard.
About This Motherboard
The Supermicro X13SCW-F motherboard supports an Intel
®
Xeon
®
E-2400 or 12th Generation
Pentium processor in a V0 - LGA 1700 socket with up to eight cores and a thermal design
power (TDP) of up to 95 W. Built with the Intel C266 chipset, this motherboard supports up
to 128 GB of ECC UDIMM DDR5 memory with speeds of up to 4400 MT/s in any of the
population congurations (one or two DIMM(s) per channel). It features PCIe 5.0 slots, SATA
3.0 connections via SlimSAS, two M.2 slots in the 2280/22110 form factors, dual 1GbE LAN
ports, and a Trusted Platform Module (TPM) header. This motherboard is the perfect solution
for network appliance, telecommuting, and media-transcoding. Note that this motherboard is
intended to be installed and serviced by professional technicians only. For processor/memory
updates, refer to our website at http://www.supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to dierentiate various models or provides infor-
mation for proper system setup.
To Next Page
Loading...
