Supermicro X13SCW-F - IPv4 HTTP Support; IPv6 PXE Support; IPv6 HTTP Support; PXE boot wait time

Super X13SCW-F User's Manual
90
IPv4 HTTP Support (Available when "Network Stack" is set to Enabled)
Use this feature to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
IPv6 PXE Support (Available when "Network Stack" is set to Enabled)
Select Enabled to enable IPv6 Preboot Execution Environment (PXE) for boot support. If
this feature is set to Disabled, IPv6 PXE boot option will not be supported. The options are
Disabled and Enabled.
IPv6 HTTP Support (Available when "Network Stack" is set to Enabled)
Use this feature to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE boot wait time (Available when "Network Stack" is set to Enabled)
Enter a value for the wait time (in seconds) to press the <ESC> key to abort the PXE boot.
The default is 0.
Media detect count (Available when "Network Stack" is set to Enabled)
Enter a value for the number of times the presence of media will be checked. The default is 1.
MAC: XXXXXXXXXXXX-IPv4 Network Conguration
MAC: XXXXXXXXXXXX-IPv4 Network Conguration
Congured
This feature indicates whether a network address congured successfully or not. The
options are Disabled and Enabled.
*If this feature is set to Enabled, the following features will become available for
conguration:
Enable DHCP
Use this feature to set the DHCP. The options are Disabled and Enabled.
*If this feature is set to Disabled, the following features will become available for
conguration:
Local IP Address - Enter an IP address in dotted-decimal notation.
Local NetMask - Enter a NetMask in dotted-decimal notation.
Local Gateway - Enter a Gateway in dotted-decimal notation.
Local DNS Servers - Enter a DNS Servers in dotted-decimal notation.
Save Changes and Exit
Select this feature to save the changes you've made and return to the upper conguration
page.