Supermicro X13SCW-F - Discard Changes and Exit; Save Changes and Exit; Trusted Computing; Security Device Support

Super X13SCW-F User's Manual
92
Discard Changes and Exit
Select this feature to discard all the changes and return to the upper conguration page.
Save Changes and Exit
Select this feature to save the changes you've made and return to the upper congura-
tion page.
Trusted Computing
When a Trusted-Platform Module (TPM) device is detected in your machine, the following
information will display:
• TPM 2.0 Device Found
• Firmware Version
• Vendor
Security Device Support
Select Enable to enable BIOS support for onboard security devices, which are not displayed
in the OS. If this feature is set to Enable, TCG EFI protocol and INT1A interface will not be
available. The options are Disable and Enable.
*When "Security Device Support" is set to Enable, the following information will display:
• Active PCR banks
• Available PCR banks
SHA256 PCR Bank (Available when "Security Device Support" is set to Enable)
Select Enabled to enable SHA256 PCR Bank support to enhance system integrity and data
security. The options are Enabled and Disabled.
Pending Operation (Available when "Security Device Support" is set to Enable)
Use this feature to schedule a TPM-related operation to be performed by a security (TPM)
device at the next system boot to enhance system data integrity. Your system will reboot to
carry out a pending TPM operation. The options are None and TPM Clear.
Note: Your system will reboot to carry out a pending TPM operation.