Supermicro X13SCW-F - Select IPv4 or IPv6; Boot Description; Boot URI; Instance of Priority 2

Chapter 4: UEFI BIOS
95
Select IPv4 or IPv6
Use this feature to select the Targeted LAN port that is boot from IPv4 or IPv6. The options
are IPv4 and IPv6.
Boot Description
Use this feature to input the HTTP boot option description, otherwise the boot option for the
URI will not be created. The maximum length should not be more than 75 characters.
Boot URI
Use this feature to input the URI address for HTTP Boot feature. The maximum length should
not be more than 128 characters.
Instance of Priority 2
Use this feature to set the rank of the targeted port.
Supermicro KMS Server Conguration
Supermicro KMS Server IP address
Use this feature to enter the Supermicro Key Management Service (KMS) server IPv4 address
in dotted-decimal notation.
Second Supermicro KMS Server IP address
Use this feature to enter the second Supermicro KMS server IPv4 address in dotted-decimal
notation.
Supermicro KMS TCP Port number
Use this feature to enter the Supermicro KMS TCP port number. The valid range is 100 -
9999. The default setting is 5696.
KMS Time Out
Use this feature to enter the KMS server connecting time-out (in seconds). The default setting
is 5 (seconds).
TimeZone
Use this feature to enter the correct time zone. The default setting is 0 (not specied).
Client UserName
Press <Enter> to set the client identity (UserName). The length is 0 – 63 characters.
Client Password
Press <Enter> to set the client identity (Password). The length is 0 – 31 characters.