19
Parameters
Robot
Working voltage（V） 14.8V
Rated power（W） 30W
Adapter
Rated input voltage（V) 100 - 240V ~ 50/60Hz
Rated output voltage（V） DC 19V 1.2A
Charging base
Rated output Voltage(V） DC 19V
Rated output Current(A) 1.2A
Due to the continuous optimization of the product, the company reserves the right of
changing the technical or design of the product, the final interpretation right belongs
to the company.
Troubleshooting & Accessories List
Troubleshooting
Troubleshoot the robot when the following abnormalities occurs.
Problems
likely cause and solution for reference
The power switch of the robot is not turned on,please turn it on first;
Maybe battery is too low, please charge the robot first.
Can not power on
1
2
3
4
5
6
7
8
9
Abnormal noise when
the device is cleaning
Red light + Du twice
Red light + Du triple
Red light + Du Quatic
Blink Red + Du twice
Blink Red + Du Triple
Blink Red + Du Quatic
Blink Yellow + Du Triple
There maybe something stuck in the brush,
please clean the brush；
The driving wheel may get stuck,please clean it then restart;
The bumper may get stuck ,please clean it then restart;
The dust box test may not be detected.
Please check if the dust box is installed correctly.
The main brush may get stuck,please clean it then restart;
The side brush may get stuck,please clean it then restart;
The anti-drop sensor may be blocked or left floating,
please move to a new location to start
Battery low, please charg the robot;
To Next Page
Loading...