Drum– Die cast aluminium or steel
Fabricated. Running on maintenance
free bearings
Important:
For best results shorten rope to required working length
plus minimum 6 wraps on the drum. Rope can be short-
ened by releasing the grub screw in the drum removing
the rope, cut to shorten then re-insert and tighten grub
screw.
Important:
To prevent drum damage synthetic rope should only be
used on steel drum winch option. Do not have excessive
rope on the drum only working length plus one layer for
rope retention. Periodically remove all layers to reduce
drum compression.
To Next Page
Loading...
