A. Fix a standard template to template A
B. Put the carriage backlashing lever B to the second stage
C. Move manually carriag so that it comes just over the gear
wheel
E. With this,carriage is level if it doesn’t, move either left or
right
F.If carriage moves right,turn the right adjustablefot clockwise,as
Fig1
G. If carriage moves left,turn the left adjustablefot clockwise,as
Fig2
3、OPERATION PROCEDURES
A. Preparations
a. Turn power switch on and open water supply cock.
b. Press (TEST)switch and check that water is supplied
B.Fitting template
To Next Page
Loading...
