The calibration of LE-300/310/400
1. Press the button of moving left and right at the same time, then
turn on the power.
2. Adjust the V gauge on the fourth wheel by pressing the button of
moving left or right, usually it is on left side.
3. Press the button “STOP” to save.
4. Adjust the V gauge on the first wheel by pressing the button of
moving left or right, usually it is on left side.
5. Press the button “STOP” to save.
6. Adjust the V gauge on the second wheel by pressing the button of
moving left or right, usually it is on left side.
7. Press the button “STOP” to save.
8. Adjust the V gauge on the second wheel，make fine adjustment
(The fine adjustment distance is 0.1mm) by Chunk buttons to let
the V gauge at the deep of V grove.
NOTE: this step is very important and make sure it is correct.
9. Press Re-edging button to see if the gauge is in the deepest of V
grove
10. Press STOP button to save it.
11. Adjust the V gauge by pressing the button of moving left or right,
usually it is on right side.
12.Press STOP button to save it.
To Next Page
Loading...
