Supore RMK-700 - Performance Specifications; Refractometer and Keratometer Specs; Environmental and Other Specs

RMK-700 Operating Manual
22
4.3 Message as printing
Message
Cause
Method of settlement
CHECK
PAPE R
-There is no printer paper
or lever is not closed.
Install printer paper or
close the lever.
5. Performance Parameter
5.1 Refractometer
Vertex Distance (VD) 0.0 mm，12.00 mm，13.5 mm，15.00mm
Sphere Power (SPH) -20.00m-1 ~ +20.00m-1
(VD=12mm, 0.12 m-1/0.25 m-1)
Cylinder Power (CYL) 0.00 m-1~+10.00 m-1 (0.12m-1/0.25m-1)
Axis (AX) 1°~ 180° (1°)
Cylinder Form -, +, MIX
Minimum Pupil Diameter 2.0mm
5.2 Keratometer
Radius of Curvature 6.5 mm ~ 9.4 mm (Increment：0.02mm)
5.3 Environmental requirements:
Operation Temperature: + 10 to + 40°C
Humidity: 30 to 75% RH
Atmospheric pressure: 700 ~ 1060 hPa.
Storage Temperature: - 25 to + 55°C
Humidity: 30 to85% RH
Atmospheric pressure: 700 ~ 1060 hPa
Transportation Temperature: - 40 to + 70°C
Humidity: 10 to 95% RH
Atmospheric pressure: 700 ~ 1060 hPa.
5.4 Others
Printer heat printing