Need help?Do you have a question about the suprema XPass 2 and is the answer not in the manual?
General| Type | Basic access control reader |
|---|---|
| IK code | IK08 |
| Vandal-proof | Yes |
| Certification | CE, FCC, KC, RoHS, REACH, WEEE, SIG |
| LED indicators | Status |
| RFID frequency | 125000 MHz |
| Number of users | 200000 user(s) |
| Fingerprint reader | No |
| Authentication type | Access chip/card |
| Access chip/card reader type | Contactless |
| International Protection (IP) code | IP67 |
| RS-485 ports | 1 |
| PC connection | RS-485/RJ-45 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -35 - 65 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| DC voltage range | 12/24 V |
| Flash memory | 64 GB |
| Internal memory | 4 GB |
| Processor frequency | 1000 MHz |
Weight and Dimensions| Depth | 25 mm |
|---|---|
| Width | 80 mm |
| Height | 130 mm |
| Weight | 220 g |
| Mounting bracket weight | 52 g |
To Next Page
