- Use a single power socket instead of multiple sockets that have
been plugged in by multiple devices, as this may cause re or
electric shock.
- Do not let metal or liquid enter the device. Otherwise, re or
electric shock may occur, and internal parts may be damaged,
resulting in device damage.
- Do not use AC power exceeding 100-240V.
- It is strictly forbidden to disassemble or modify the label machine
without authorization, which may cause re or electric shock
caused by high voltage parts.
- Please keep the label printer away from alcohol, gasoline, and
other ammable solvents and re sources to avoid deagration
and re.
- Use wrung-out wet gauze to clean the device. Do not use
ammable organic solvents.
- Please use the label printer in a clean place. Please do not use
it on carpets or blankets, otherwise, a large amount of dust will
quickly cause a short circuit.
SAFETY INFORMATION
18
To Next Page
Loading...
