10
Warning
◼ Please use a single power outlet, do not
use multiple outlets that have been
plugged into multiple devices, as this
may cause fire or electric shock.
◼ Please do not let metal or liquid enter
the equipment, otherwise it will cause
fire or electric shock and damage
internal parts, resulting in equipment
damage.
◼ Please do not use AC power beyond
100-240V.
◼ U n a u t h o ri z e d d i s a s s e m b ly or
modification of this label printer is
strictly prohibited, which may result in
fire or contact caused by high voltage
components.
◼ Please keep the label printer away from
flammable solvents such as alcohol and
gasoline, and keep away from fire
sources.
◼ When cleaning the printer, use a sewed
wet gauze and do not use organic
flammable solvents.
◼ Please use the label printer in a clean
place, do not use it on carpet or felt,
otherwise a lot of dust will easily cause
short circuit.
◼ This printer contains a cutter. Please use
it carefully to prevent scratches.
◼ During use or storage, if you notice
odor, heat, discoloration, deformation
or any abnormal situation, immediately
disconnect the power adapter, remove
the battery, and stop using the device.
◼ Do not use batteries that are deformed
or leak.
◼ Do not get wet with the device/power
adapter/power outlet/battery. Do not
plug or unplug the power plug with wet
hands to prevent electric shock.
◼ Do not use sharp objects such as
tweezers or metal pens when replacing
batteries.
◼ Do not throw the battery into a fire or
high temperature.
Attention
When using the printer, do not force
the label tape out of the outlet.
Please take it out after the label is cut,
otherwise it will affect the print
quality or damage your printer.
This printer is very precise, please use
it in a flat place to prevent it from
falling and damage, and to prevent
impact vibration.
This printer and label tape should be
stored at room temperature, dry,
ventilated, and out of direct sunlight.
When foreign matter enters the
inside of the printer, stop using it
immediately to prevent damage to
the device.
Before installing a new label tape,
please tighten the ribbon to rewind
the ribbon to pre-tighten the ribbon.
When opening the “back cover”,
do not let any objects touch the
inside of the printer.
Precautions
●
Please use the original supvan label to
ensure the print quality and damage
the equipment.
If the printer caused by the use of non-
original label tape is damaged, we will
not be responsible for the warranty.
Please do not touch the print head with
your hands. If the printer is finished, it
may cause skin burns if touched.
When the printer is not in use for a long
time, please unplug the power cable
and take out the battery inside the
printer to prevent the battery from
leaking and damaging the device.
Please do not press the device, do not
force the keyboard with force or gravity.
Keep away from electromagnetic
interference sources that generate
magnetic fields.
When using the printer, please do not
block the label outlet, so as to the label
to be out smoothly.
To Next Page
Loading...
