Surface 604 - Before You Ride; Safety First Precautions

OWNERS MANUAL
5
NOTE: STRONGLY RECOMMENDED, please read this Manual in its en-
tirety. Here we explain the importance of tting the bike, safety and
general maintenance. Be sure you understand each point in this section
before setting out on your rst ride. Refer to specic sections of the
Manual for detailed content to ensure you are prepared and ready for a
safe and enjoyable ride.
BIKE FIT
1
The t of your bicycle is extremely important. If the bicycle is too
large or too small, this may pose a danger in causing you to lose
control or fall. In addition, proper t is essential for maximum perfor-
mance and comfort. To determine the right size of bike that suits your
body, go to Section THREE. Your dealer will also be able to assist you in
nding the right size. When referring to size, bicycles are measured
according to the frame size. This number signies the size of the frame
and the overall size of the bike.
2
With the right sized frame, you can now adjust accessories to
maximize safety, comfort and performance. Start with determin-
ing whether your seat height is set correctly. To check this and/or make
adjustments, go to THREE.
3
Now check to ensure the saddle is securely fastened to the post
(see Section THREE) and the post clamp is secured (see Section
FOUR). A securely fastened saddle does not move in any direction and
a secure post clamp prevents the post from sliding up or down.
4
Check to see if the handlebars and stem are set at the right
height for you and are secure.
5
Now check the brakes. Squeeze the brake levers. Can you oper-
ate them with ease? Do you see the front brake pads grasping
the disc when you squeeze the brake levers? It is also a good idea to lift
your bicycle, spin each wheel, grasp the brake and ensure proper func-
tion. If the brake does not function with ease, then have your local
dealer/mechanic adjust them.
6
Lastly, ensure that you fully understand how to operate your new
Surface604 bicycle (see Section FOUR). Your new bicycle oers
features unlike regular pedal operated bicycles. Contact your local
dealer to have any features or functions explained to you before your
rst ride.
SAFETY FIRST!
1
ALWAYS WEAR AN APPROVED HELMET WHEN RIDING YOUR SUR-
FACE604 BICYCLE.
Please refer to your helmet manufacturer’s instructions for proper t,
use and care of the helmet. Helmets are available from your dealer.
2
Check to see that you have all required and recommended safety
equipment for your rst and future rides. Also, be sure that you
know all laws pertaining to cycling in your region. The laws may include
where you can cycle, the use of hand signals or the need for mandato-
ry equipment while cycling.
3
Next, are your wheels securely fastened to the frame/forks?
Wheels that are not safely secure can wobble and impede the
bicycle performance or worse, dislodge while riding and cause injury.
For your Surface604 bicycle, the front wheel has a quick release
mounting mechanism and the rear wheel has a bolted mounted device.
See Section FOUR for an explanation on how to properly secure both
types of mounting devices.
4
Now look at your pedals. Check to see that they are securely
fastened and the pedals spin freely.
BEFORE YOU RIDE
1