Once connected to a power source, you will need to prime
the internal system with water before the first use.
Survivor Filter PRO X
Cleaning
The Survivor Filter PRO X is a precision device. Please
follow all instructions in order to allow trouble-free
and reliable performance.
Copyright SURVIVOR FILTER™ 2018
Unscrew the Ultra Filter counter-clockwise and gently
remove the
Ultra Filter/Carbon Filter assembly.
Unclip the
Carbon Filter counter-clockwise from the
Ultra Filter/Carbon Filter assembly.
Flush all filter elements and
hoses with clean, fresh
water. Shake out each filter element to remove any
excess water.
Air dry and then reassemble for storage.
WARNING: DO NOT use commercial cleaning
solutions or chemicals to clean your Survivor Filter
PRO X as they may damage the delicate filters and
components.
Do not submerge the PRO X with the baery door or
Micro USB door open. To clean housing of the PRO X,
simply wipe down with a clean cloth or paper towel.
Cleaning: Your Survivor Filter PRO X should be disassembled
and cleaned with fresh, clean water after each use.
To Next Page
Loading...