7-16
INSPECTION AND MAINTENANCE
84MM6-01E
#1: Valve clearance for K10C engine models is not required for periodic maintenance.
#2: For further details, see “Engine Oil and Filter” in this section.
#3: Be sure to perform the engine coolant level check under the daily inspection in “OPERATING YOUR VEHICLE” section.
If you use the engine coolant other than SUZUKI LLC: Super (Blue) for replacement, follow the schedule of SUZUKI LLC: Standard
(Green).
Interval: This interval should be judged by odometer
reading or months, whichever comes first.
km (x1000) 70 80 90 100 110 120
miles (x1000) 43.75 50 56.25 62.5 68.75 75
months 42 48 54 60 66 72
ENGINE
*1-1. Engine accessory drive belt Tension check, *Adjustment, *Replacement – I – I – R
*1-2. Valve clearance K10B engine models only (#1) – I – – – I
1-3. Engine oil and engine oil filter ACEA Standards or SUZUKI GENUINE OIL (#2) R R RRRR
Other than ACEA Standards or SUZUKI GENUINE OIL (#2)
Replace every 7500 km (4687 miles) or 6 months.
1-4. Engine coolant SUZUKI LLC: Super (Blue) (#3)
First time only: Replace at 160000 km (100000 miles) or 96 months.
Second time and after: Replace every 80000 km (50000 miles) or
48 months.
SUZUKI LLC: Standard (Green) Replace every 40000 km (25000 miles) or 36 months.
*1-5. Exhaust system (except catalyst) – I – – – I
IGNITION
2-1. Spark plugs Iridium plug Replace every 30000 km (18750 miles) or 24 months.
To Next Page