2-18
BEFORE DRIVING
84MM6-01E
Outside Rearview Mirrors
Adjust the outside rearview mirrors so you
can just see the side of your vehicle in the
mirrors.
84MM00213
You can adjust the outside rearview mir-
rors by hand with the knob (1) located on
the driver’s or front passenger’s door
panel.
Electric Mirrors (if equipped)
84MM20205
The switch to control the electric mirrors is
located on the driver’s door panel. You can
adjust the mirrors when the ignition switch
is in the “ACC” or “ON” position. To adjust
the mirrors:
1) Move the selector switch (1) to the left
(2) or right (3) to select the mirror you
wish to adjust.
2) Press the outer part of the switch (1)
that corresponds to the direction
((a),(b),(c),(d)) in which you wish to
move the mirror.
3) Return the selector switch (1) to the
center position to help prevent unin-
tended adjustment.
Front Seats
Seat Adjustment
WARNING
Be careful when judging the size or
distance of a vehicle or other object
seen in the side convex mirror. Be
aware that objects look smaller and
appear farther away than when seen
in a flat mirror.
(a)
(c)
(3)
(b)
(2)
(d)
(b)
(d)
(c)
(a)
(1)
WARNING
Never attempt to adjust the driver’s
seat or seatback while driving. The
seat or seatback could move unex-
pectedly, causing loss of control.
Make sure that the driver’s seat and
seatback are properly adjusted
before you start driving.
WARNING
To avoid excessive seat belt slack,
which reduces the effectiveness of
the seat belts as a safety device,
make sure that the seats are adjusted
before the seat belts are fastened.
WARNING
All seatbacks should always be in an
upright position when driving, or seat
belt effectiveness may be reduced.
Seat belts are designed to offer maxi-
mum protection when seatbacks are
in the upright position.
To Next Page
Loading...
