47
If not equipped with Keyless Start System:
Turn the ignition key to the “ON” position.
2. Pull out the emergency stop switch lock
plate 2.
3. Push the start & stop switch 3 three times in
10 seconds. A short beep will be heard if the
cancellation is successfully finished.
4. If equipped with Keyless Start System:
Press and hold the engine switch 1 for more
than two seconds to turn off the power.
NOTE:
The power can also be turned off by pressing
the lock button on the keyless fob.
If not equipped with Keyless Start System:
Turn the ignition key to the “OFF” position.
5. Set the plate 2 in the original position.
NOTE:
• Canceling of the system activation is possible
regardless of whether or not the engine oil
has been replaced. Once the system has
operated, however, Suzuki strongly recom-
mends that the engine oil be replaced before
canceling the system activation.
• Even if the engine oil has been replaced with
the system not operating, it is still necessary
to perform the cancellation.
To Next Page
Loading...
