30
1. Shift into “NEUTRAL”.
2. Move the release lever 1 to the “release”
position.
3. Grab the handle on the back of the motor
cover and tilt the motor all the way up until it
is automatically locked in the fully tilted up
position by the tilt up lock arm 2.
To lower the motor back down:
1. Move the release lever 1 to the lock posi-
tion.
NOTICE
If you use the throttle grip handle to raise or
lower the motor, the handle may break.
Never use the throttle grip handle to raise or
lower the motor.
2. Pull the motor slightly towards you and
slowly let the motor down.
WARNING
If you do not take proper precautions when
tilting up the motor, fuel may leak out.
Disconnect the fuel line whenever you leave
the motor tilted up for a long period of time.
NOTICE
If you use the tilt up lock arm to hold the
motor in the fully tilted position for trailering,
the tilt up lock arm could release resulting in
damage to the motor.
When trailering your boat, never use the tilt up
lock arm to hold the motor in the fully tilted
position.
To Next Page
Loading...
