47
4. If equipped with Keyless Start System:
Press and hold the engine switch 1 for more
than two seconds to turn off the power.
NOTE:
The power can also be turned off by pressing
the lock button on the keyless fob.
If not equipped with Keyless Start System:
Turn the ignition key to the “OFF” position.
5. Set the plate 2 in the original position.
For the multiple engines:
1. If equipped with Keyless Start System:
Press and hold the engine switch 1 for more
than two seconds to turn on the power.
OFF
ON
START
If not equipped with Keyless Start System:
Turn the ignition key to the “ON” position.
2. Pull out the emergency stop switch lock
plate 2.
3. Push the start & stop switch 3 three times in
10 seconds. A short beep will be heard if the
cancellation is successfully finished.
4. If equipped with Keyless Start System:
Press and hold the engine switch 1 for more
than two seconds to turn off the power.
NOTE:
The power can also be turned off by pressing
the lock button on the keyless fob.
OFF
ON
START
To Next Page
Loading...
