89
NOTE:
Consult your authorized Suzuki Marine Dealer
for inspection and replacement of internal
anodes attached to the cylinder block/cylinder
head.
NOTICE
If anodes are not properly maintained, under-
water aluminum surfaces (such as the lower
unit) will suffer galvanic corrosion damage.
• Periodically inspect anodes to make sure
they have not become detached.
• Do not paint anodes, as this will render
them ineffective.
• Periodically clean anodes with a wire brush
to remove any coating which might
decrease their protective ability.
Bonding wires
Bonding wires are used to electrically connect
the engine components so they exist in a com-
mon ground circuit. This allows them to be pro-
tected against electrolysis by the anodes.
These wires and their terminals should be
checked periodically to be sure they have not
been damaged.
DF300B/325A/350A
DF300B/325A/350A
DF300B/325A/350A
DF300B/325A/350A
DF300B/325A/350A
DF300B/325A/350A
DF300BMD/350AMD
DF300BMD/350AMD
To Next Page
Loading...
