Suzuki DR200SE - Page 228

10-16 DR200SEK4/K5 (’04, ’05-MODELS)
BRAKE + WHEEL
Unit: mm (in)
SUSPENSION
Unit: mm (in)
ITEM STANDARD LIMIT
Brake lever play 0.1 – 0.3
(0.004 – 0.010)
—
Rear brake pedal free travel 20 – 30
(0.8 – 1.2)
—
Rear brake pedal height 2.5
(0.10)
—
Brake drum I.D.
Rear —
130.7
(5.15)
Brake lining thickness
Rear —
1.5
(0.06)
Brake disc thickness
Front
3.5 ± 0.2
(0.138 ± 0.008)
3.0
(0.12)
Brake disc runout
Front —
0.30
(0.012)
Master cylinder bore
Front
12.700 – 12.743
(0.5000 – 0.5017)
—
Master cylinder piston diam.
Front
12.657 – 12.684
(0.4983 – 0.4994)
—
Brake caliper cylinder bore
Front
33.960 – 34.010
(1.3370 – 1.3390)
—
Brake caliper piston diam.
Front
33.878 – 33.928
(1.3338 – 1.3357)
—
Wheel rim runout
Axial —
2.0
(0.08)
Radial —
2.0
(0.08)
Wheel axle runout
Front —
0.25
(0.010)
Rear —
0.25
(0.010)
Tire size Front 70/100-21 44M —
Rear 90/100-18 54M —
Tire tread depth
Front —
40
(0.16)
Rear —
4.0
(0.16)
ITEM STANDARD LIMIT NOTE
Front fork stroke 205
(8.1)
—
Front fork spring free length
—
561
(22.1)
Front fork oil level 179.5
(7.07)
—
Rear shock absorber spring
pre-set length
231
(9.1)
—
Rear wheel travel 205
(8.1)
—
Swingarm pivot shaft runout
—
0.6
(0.02)