Suzuki GP125 - Page 37

35
ENGINE DISASSEMBLY
The procedure for engine disassembly is 4. Loosen the rotor nut by using special tool. \
sequencially explained in the following steps.
Rotor holder 09930-40113
1. Remove cylinder. |
2.
Remove
the
piston
pin
circlip.
Use
а
rug,
as
5.
Remove
the
rotor
by
using
special
tool.
shown,
in
order
to
avoid
dropping
the
circlip
-
into the
crankcase.
Rotor
remover
shaft
|
09930-30102
Attachment С | 09930-30161
3. Draw out piston pin by using special tool ^
and take off piston.
$ I ams 6. Remove the stator by loosening stator secur.
| Pitonpinpulle | (06801034510 | ina screws and neutral lead wire.