Suzuki GSR600 User Manual

GSR600
99500-36160-01E

Suzuki GSR600 Specifications

General

Engine Type	4-stroke, 4-cylinder, liquid-cooled, DOHC
Displacement	599 cc
Compression Ratio	12.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Lubrication	Wet sump
Starter	Electric
Transmission	6-speed, constant mesh
Final Drive	Chain
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70ZR17M/C (58W), tubeless
Rear Tire	180/55ZR17M/C (73W), tubeless
Bore x Stroke	67.0 mm x 42.5 mm
Overall Length	2, 090 mm
Overall Width	795 mm
Wheelbase	1440 mm
Ground Clearance	130 mm
Seat Height	785 mm
Fuel Tank Capacity	16.5 L

Summary

General Information

WARNINGS AND PRECAUTIONS

Safety guidelines for service personnel and motorcycle reliability.

FUEL, OIL, AND COOLANT RECOMMENDATIONS

Specifies recommended fuel, engine oil, brake fluid, and coolant types.

SPECIFICATIONS AND CAPACITIES

Lists key technical data including dimensions, engine, drive train, chassis, and capacities.

Periodic Maintenance

MAINTENANCE SCHEDULE AND CHART

Outlines recommended service intervals and tasks for regular maintenance.

KEY MAINTENANCE PROCEDURES

Details procedures for air cleaner, spark plug, and valve clearance.

FLUIDS AND WEAR INSPECTIONS

Covers engine oil, brakes, tires, and steering system checks.

Engine Service

ENGINE REMOVAL AND INSTALLATION

Detailed step-by-step procedures for removing and installing the engine.

ENGINE DISASSEMBLY

Comprehensive guide for disassembling engine components.

MAJOR COMPONENT INSPECTION AND SERVICE

Covers inspection and service for camshaft, clutch, oil pump, and generator.

CRANKSHAFT AND CONROD INSPECTION

Details measurements for crankshaft and conrod components.

ENGINE REASSEMBLY

Step-by-step guide for reassembling engine components.

FI System Diagnosis

PRECAUTIONS AND ELECTRICAL HANDLING

Safety guidelines for handling FI system components and connectors.

CIRCUIT INSPECTION AND TESTING

Methods for checking electrical circuits using testers and multimeters.

SELF-DIAGNOSIS AND SDS PROCEDURES

Instructions for using self-diagnosis modes and the SDS tool.

MALFUNCTION CODE ANALYSIS

Lists DTCs, detected conditions, possible causes, and checks.