EasyManua.ls Logo

Suzuki GSR600 - Engine Coolant Level Check; ENGINE COOLANT Change; Cooling System

Suzuki GSR600
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERIODIC MAINTENANCE 2-17
COOLING SYSTEM
ENGINE COOLANT LEVEL CHECK
Keep the motorcycle upright.
Check the engine coolant level by observing the engine cool-
ant reservoir.
A Full line B Lower line
If the level is below the lower line, Lift and support the fuel
tank (5-3) and add engine coolant to the full line from the
engine coolant reservoir filler.
ENGINE COOLANT CHANGE
Remove the right fuel tank side cover.
Remove the radiator cap 1.
Drain engine coolant by disconnecting the radiator hose 2
from the pump.
Flush the radiator with fresh water if necessary.
Connect the radiator hose 2 securely.
Pour the specified engine coolant up to the radiator inlet.
Engine coolant capacity (total): 2 800 ml
Bleed the air from the engine coolant circuit. (2-18)
ENGINE COOLANT INFORMATION (7-2)
Inspect every 6 000 km (12 months).
Replace engine coolant every 2 years.
* Do not open the radiator cap when the engine is hot,
as you may be injured by escaping hot liquid or
vapor.
* Engine coolant may be harmful if swallowed or if it
comes in contact with skin or eyes. If engine coolant
gets into the eyes or in contact with the skin, flush
thoroughly with plenty of water. If swallowed, induce
vomiting and call physician immediately!

Table of Contents

Related product manuals