2-16 PERIODIC MAINTENANCE
CLUTCH
• Loosen the lock-nut 1 and turn in the adjuster 2 all the way
into the clutch lever assembly.
• From that position, turn out the adjuster screw 3 rotations.
• Lift and support the fuel tank. (5-3)
• Loosen the lock-nut 3 and fully turn in the clutch cable
adjuster 4.
• Remove the clutch release adjuster cap 5.
• Loosen the lock-nut 6 and turn in the adjusting screw 7 until
it stop.
• From this position, turn out the adjusting screw 7 1/2 rotation,
and tighten the lock-nut 6 while holding the adjusting screw
7.
• Turn the cable adjuster 4 to obtain 10 – 15 mm of free play
A at the clutch lever end.
• Tighten the lock-nut 3 and 1.
Clutch lever play A: 10 – 15 mm
Clutch release screw: 1/2 turn out
Clutch release adjuster cap: 11 N·m (1.1 kgf-m)
Inspect every 6 000 km (12 months).
To Next Page
Loading...
