Suzuki GSR600 - Chassis Bolts and Nuts

PERIODIC MAINTENANCE 2-29
CHASSIS BOLTS AND NUTS
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-30 for the loca-
tions of the following nuts and bolts on the motorcycle.)
Tighten initially at 1 000 km (2 months) and every
6 000 km (12 months) thereafter.
Item N·m kgf-m
1 Steering stem head nut 90 9.0
2 Steering stem lock-nut 80 8.0
3 Front fork upper clamp bolt 23 2.3
4 Front fork lower clamp bolt 23 2.3
5 Front fork cap bolt 23 2.3
6 Front axle 100 10.0
7 Front axle pinch bolt 23 2.3
8 Handlebar clamp bolt 23 2.3
9 Front brake master cylinder mounting bolt 10 1.0
0 Front brake caliper mounting bolt 25 2.5
A Front brake caliper housing bolt 22 2.2
B Front brake pad mounting pin 16 1.6
C Brake hose union bolt 23 2.3
D Air bleeder valve 7.5 0.75
E Brake disc bolt 23 2.3
F Rear brake caliper mounting bolt 18 1.8
G Rear brake caliper sliding pin 33 3.3
H Rear brake pad mounting pin 16 1.6
I Rear brake master cylinder mounting bolt 10 1.0
J Rear brake master cylinder rod lock-nut 18 1.8
K Front footrest bracket mounting bolt 23 2.3
L Swingarm pivot shaft 15 1.5
M Swingarm pivot nut 100 10.0
N Swingarm pivot lock-nut 90 9.0
O
Rear shock absorber mounting bolt/nut (Upper & Lower) 50 5.0
P Cushion rod nut 78 7.8
Q Cushion lever mounting nut 132 13.2
R Rear axle nut 100 10.0
S Rear sprocket nut 60 6.0