Suzuki GP125 - Page 48

3-16
Fix the piston ring in the piston ring groove,
measure the ring side clearance with the thick
ness gauge while matching the sliding surfaces of
piston and ring.
d
STD
clearance
|
0.03-0.07
mm(0.001-0.003in)
PISTON PIN
Measure
the
piston
pin
outside
diameter
with
the
micrometer.
Ey]
Service
limit
13.980
mm
(0.5504
in.)
CONNECTING ROD
Measure the con-rod small end bore with the
caliper gauge.
Service
limit
14.040
mm
(0.5528
in)