Suzuki GP125 - Page 76

5-9
LEFT HANDLEBAR SWITCH
Check the conductivity between the respective
lead terminals on the left handle switch box
(headlight housing). Refer to the following chart
for this check.
Dimmer switch
w Y
HI
Fod
Тит signal switch
| B | ы La
zd ГО
L
HORN BUTTON
Check the conductivity between the green lead
terminal on the left handle switch box inside the
headlight housing and the handlebar ground,
while the horn button is pressed. If conductivity
is present, the horn button is normal.
EN
ENGINE KILL SWITCH
(Only for GP125)
Check the conductivity between the B/Y lead
terminal on the right handle switch box inside
the headlight housing and the handlebar ground,
while the engine kill switch is turn to RUN. If
по conductivity is present, the engine kill switch
is normal.