Need help?Do you have a question about the Suzuki GS700 and is the answer not in the manual?
General| Brand | Suzuki |
|---|---|
| Model | GS700 |
| Category | Motorcycle |
| Language | English |
Detailed physical dimensions and weight specifications for the motorcycle.
Technical details of the motorcycle's frame, suspension, steering, and wheels.
Engine type, bore, stroke, displacement, and compression ratio data.
Details on the ignition system, battery, and generator.
Clutch type, gear ratios, and drive chain details.
Fuel tank, reserve, and engine oil capacities.
Details on adjusted valve timing for improved performance.
Explanation of the added spring washer in the clutch assembly.
Information on updated journal bearings and their selection.
Federal emission standards for motorcycles.
Causes and measurement of carbon monoxide in exhaust.
Common carburetor issues leading to increased emissions.
Engine component failures causing emission problems.
Schematic showing the routing of the evaporative emission control system.
Detailed measurements for valve diameter, lift, and clearance.
Specifications for camshaft height, journals, and cylinder head.
Measurements for cylinder bore, piston, and ring clearances.
Data for connecting rod and crankshaft dimensions and clearances.
Details on oil pump reduction ratio and oil pressure.
Measurements for clutch plates, springs, and cable play.
Ratios, clearances, and chain specifications.
Details on carburetor type, bore, idle RPM, and fuel level.
Specified torque values for engine components.
Specified torque values for chassis components.
Inspection and charging procedures for the motorcycle battery.
Cleaning and maintenance of the air cleaner element.
Procedure for inspecting and adjusting valve clearances.
Cleaning, gapping, and replacement of spark plugs.
Inspection and adjustment of carburetor and related cables.
Checking and adjusting clutch cable play.
Inspection, adjustment, cleaning, and lubricating the drive chain.
Inspection of brake fluid, pads, and pedal height.
Adjusting front and rear brake light switches.
Procedure to remove air from the brake hydraulic system.
Specified torque for cylinder head and exhaust fasteners.
Inspection of tire tread condition and pressure.
Checking for play and proper adjustment of the steering stem.
Procedures for front fork inspection and oil replacement.
Torque specifications for critical chassis fasteners.
To Next Page
