6-45
6. Draw out the axle shaft.
7. With the wheel moved forward,
remove the chain from the
sprocket.
8. Remove the rear brake caliper
assembly 4.
9. Pull the rear wheel assembly rear-
ward.
NOTE: Never depress the rear brake
pedal with the rear wheel removed. It
is very difficult to force the pads back
into the caliper assembly.
10. To replace the wheel reverse the
complete sequence listed.
11. Adjust the drive chain slack.
12. After installing the wheel, apply
the brake several times and then
check that the wheel rotates
freely.
To Next Page
Loading...
