2-36
SEAT LOCK AND
HELMET HOLDERS
Front Seat
To remove the front seat.
1. Remove the bolts and fasteners.
Unhook the hooks. Remove the
right and left side frame cover 1.
2. Remove the right and left bolts 2.
3. Raise the front end of the seat
and slide it forward.
To reinstall the seat, slide the seat
hooks into the seat hook retainers on
the frame and tighten the bolts
securely.
WARNING
Failure to install the seat properly
could allow the seat to move and
cause loss of rider control.
Fasten the seat securely in its
proper position.
To Next Page
Loading...
