Suzuki 1987 GSX-R150 User Manual

Details the recommended intervals for routine maintenance tasks and inspections.

Provides step-by-step instructions for various maintenance and tune-up tasks.

Explains how to perform a cylinder compression test for internal engine condition.

Provides detailed steps for removing and reinstalling the engine assembly from the motorcycle.

Outlines the process for disassembling various engine components.

Covers inspection and servicing procedures for key engine components.

Details the procedures for servicing the cylinder head, including valve adjustments.

Details inspection of camshafts for wear and runout.

Guides the selection of conrod-crankpin bearings based on specifications.

Covers the selection of crankcase and crankshaft bearings.

Covers inspection of clutch drive and driven plates for wear and distortion.

Provides information on oil pump inspection and servicing.

Exploded view and components of the transmission system.

Details the disassembly process for the countershaft gears and components.

Outlines the steps for disassembling the driveshaft.

Provides reassembly procedures for the countershaft and driveshaft.

Details the steps for reassembling the engine.

Detailed illustration and construction of the carburetor assembly.

Step-by-step instructions for disassembling the carburetor.

Provides instructions for reassembling the carburetor after service.

Details the procedure for synchronizing and balancing the carburetors.

Overview of the engine lubrication system.

Instructions for checking engine oil pressure.

Explains the generator, regulator, and charging circuit.

Details the procedure for checking the charging system output.

Step-by-step instructions for removing and disassembling the generator.

Provides instructions for reassembling and remounting the generator.

Overview of the ignition system components and operation.

Covers inspection and testing of the ignition coil.

Explains inspection and testing of the signal generator.

Details testing procedures for the igniter unit.

Explains the starter system, motor, relay, and switches.

Step-by-step instructions for removing and disassembling the starter motor.

Provides instructions for reassembling the starter motor.

Covers removal, disassembly, and inspection of the combination meter.

Covers inspection and continuity checks for various motorcycle switches.

Covers battery specifications, initial charging, and servicing.

Covers removal, disassembly, inspection, and reassembly of the front wheel.

Details front brake caliper removal, disassembly, and pad replacement.

Provides steps for reassembling and remounting the front brake caliper.

Covers disassembly, inspection, and reassembly of the front fork assembly.

Covers removal, disassembly, and reassembly of the steering stem.

Details rear brake caliper removal, disassembly, and pad replacement.

Details rear brake caliper removal and disassembly procedures.

Covers removal and disassembly of the rear brake master cylinder.

Covers removal, disassembly, inspection, and reassembly of the rear wheel.

Covers tire removal, inspection, and mounting procedures.

Exploded view and tightening torques for swingarm components.

Details disassembly and tightening torques for shock absorber and cushion lever.

Provides a comprehensive list of common complaints, their causes, and remedies for various systems.

Detailed service specifications and limits for various engine and chassis parts.

Exploded view of the clutch assembly for the GSX-R750R.

Exploded view of the transmission components for the GSX-R750R.

Chart of tightening torque specifications for the GSX-R750H ('87-MODEL).

Lists tightening torque specifications for chassis components of the GSX-R750H.

Covers combination meter and system specifications for the GSX-R750H.