Suzuki GSX-R150 User Manual

IMPORTANT
BREAK-IN (RUNNING-IN) INFORMATION
FOR YOUR MOTORCYCLE
The first 1600 km are the most important in
the life of your motorcycle. Proper break-in
operation during this time will help ensure
maximum life and performance from your
new motorcycle. Suzuki parts are manufac-
tured of high quality materials, and
machined parts are finished to close toler-
ances. Proper break-in operation allows the
machined surfaces to polish each other and
mate smoothly.
Motorcycle reliability and performance
depend on special care and restraint exer-
cised during the break-in period. It is espe-
cially important that you avoid operating the
engine in a manner which could expose the
engine parts to excessive heat.
Please refer to the BREAK-IN (RUNNING-
IN) section for specific break-in recommen-
dations.

Suzuki GSX-R150 Specifications

General

Engine Type	4-Stroke, Liquid-Cooled, DOHC
Displacement	147.3 cc
Bore x Stroke	62.0 mm x 48.8 mm
Compression Ratio	11.5:1
Fuel System	Fuel injection
Starter	Electric
Transmission	6-speed constant mesh
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Swingarm type, coil spring, oil damped
Fuel Tank Capacity	11.0 L
Overall Width	700 mm
Seat Height	785 mm
Curb Weight	131 kg
Final Drive	Chain
Lubrication System	Wet sump
Front Brake	Disc brake
Rear Brake	Disc brake
Front Tire	90/80-17
Rear Tire	130/70-17
Overall Length	2, 020 mm
Overall Height	1075 mm
Ground Clearance	160 mm
Wheelbase	1300 mm

Summary

Break-In (Running-In) Information For Your Motorcycle

Controls

Fuel, Engine Oil and Coolant Recommendations

Engine Oil

Guidelines for selecting and using the correct engine oil based on SAE, API, and JASO classifications.

Break-In (Running-In) and Inspection Before Riding

Maximum Engine Speed Recommendation

Inspection Before Riding

Essential safety checks to perform on the motorcycle before starting to ride.

Inspection and Maintenance

Maintenance Schedule

Chart outlining recommended periodic maintenance intervals and tasks.

Battery

Engine Oil

Procedures for checking and changing engine oil and filter.

Brakes

Information on brake system inspection, hose inspection, and pad wear.

Tires

Information on tire condition, pressure, loading, and replacement.

Troubleshooting