Need help?Do you have a question about the Suzuki 1982 GS450GA and is the answer not in the manual?
General| Brand | Suzuki |
|---|---|
| Model | 1982 GS450GA |
| Category | Motorcycle |
| Language | English |
Instructions for safely starting the motorcycle engine.
Guidelines for safely moving the motorcycle from a standstill.
Specific driving advice for the SUZUKIMATIC transmission system.
Procedures for safely stopping and parking the motorcycle.
Precautions and guidelines for installing accessories on the motorcycle.
Advice and warnings regarding motorcycle modifications.
Importance of helmets, apparel, and pre-ride inspections for safety.
Information on stopping distances and respecting riding limits.
Emphasizes riding within personal skill boundaries to avoid accidents.
Identification of major motorcycle components.
Overview of the ignition key positions and handlebar controls.
Explains the OFF, C, ON, PARKING, and LOCK positions of the ignition switch.
Explanation of speedometer, odometer, and warning lights.
Operation of dimmer, turn signals, and parking brake lever.
Operation of engine kill switch, starter, and throttle grip.
Controls for headlights, turn signals, and horn.
How to use the engine kill switch for emergency shutdown.
Fuel tank cap operation and fuelcock ON, RESERVE, PRIME positions.
Instructions for using the carburetor choke lever for starting.
How to use the 2-speed transmission lever for shifting.
Applying rear brake and using motorcycle stands.
Location and use of the helmet holder.
Specifications for gasoline, gear oil, and engine oil.
Guidelines for break-in speed limits and varying engine load.
Importance of varied speed and oil circulation during break-in.
Significance of first service and detailed pre-ride checks.
Step-by-step guide for starting the engine and beginning to ride.
How to operate the transmission and shift gears smoothly.
Techniques for hills and warnings about brake usage.
How to stop the motorcycle and secure it when parked.
Chart of service intervals and warnings for inspections.
Information regarding emission control devices and systems.
Explanation of T (Tighten), C (Clean), I (Inspect), R (Replace) codes.
Inventory of tools included in the motorcycle's tool kit.
Guidelines for lubrication and checking battery fluid and terminals.
Importance of breather pipe and periodic specific gravity checks.
Step-by-step instructions for washing and oiling the air cleaner element.
How to inspect for tears and replace a damaged element.
Checking/adjusting gap, analyzing color, and replacing spark plugs.
How to check and maintain the correct engine oil level.
Detailed instructions for changing engine oil and filter.
How to adjust idle speed and throttle cable play.
Brake inspection schedule and warnings for brake fluid.
Adjusting throttle cable and note on automatic chain tensioner.
Checking front reservoir fluid level and disc brake pad wear.
Advice on brake system repairs and high-pressure operation.
Adjusting pedal travel and checking brake lining wear.
Steps for adjusting the parking brake cable and lever play.
Adjusting front and rear brake light switches for proper activation.
Adjusting the side stand switch for proper indicator function.
Recommended tire pressures and guidelines for tread wear.
Checking and adjusting front fork air pressure and oil.
How to adjust the rear shock absorber spring pre-load.
Step-by-step process for removing the front wheel assembly.
Important warnings and cautions for reassembling the front wheel.
Step-by-step process for removing the rear wheel assembly.
Steps for replacing the headlight bulb and related warnings.
Details on bulb wattage ratings and precautions for replacing lenses.
Where to find the fuse box and critical warnings for fuse replacement.
Steps to diagnose and resolve engine starting and stalling issues.
Advice to consult a dealer for troubleshooting, especially under warranty.
List of materials and initial steps for storing the motorcycle.
Preparing fuel system, engine, and battery for long-term storage.
Tips for preserving tires and bodywork during storage.
Steps for cleaning, oil change, lubrication, and final checks after storage.
Specific caution for cleaning brake discs before returning to service.
Technical specifications for dimensions, engine, and transmission.
Specifications for chassis, electrical system, and fluid capacities.
Visual representation of the motorcycle's electrical system.
Explanation of wire color abbreviations used in the diagram.
To Next Page