2-30
SUZUKI DRIVE MODE SELECTOR
4
Engine power characteristics can be
selected from 3 modes by operating
the drive mode selector to suit rider’s
preference in various riding condi-
tions.
Suzuki Drive Mode Selector
Operation
Drive mode is preset at A-mode when
the ignition switch and the engine
stop switch are turned on. At this
time, the Suzuki drive mode indicator
shows nothing. Follow the procedure
below to operate the Suzuki drive
mode selector.
1. Turn on the ignition switch and the
engine stop switch.
2. Push the Suzuki drive mode
selector UP “ ” or DOWN “ ” for
1 second until the Suzuki drive
mode indicator shows A.
3. Push the Suzuki drive mode
selector to change drive mode.
Pushing the UP “ ” switch can
change from A to C to B to A.
Pushing the DOWN “ ” switch
can change from A to B to C to A.
The Suzuki drive mode indicator
indicates actual drive mode.
NOTE:
• Operating the Suzuki drive mode
selector while riding with the throt-
tle opened will change the engine
speed because of engine power
characteristics change.
• The Suzuki drive mode indicator
blinks when drive mode change
operation is failed.
• Turning off the ignition switch or
the engine stop switch will return
the drive mode to A-mode. Start
the engine and reset the drive
mode.
A
B
C
MODE UP
MODE DOWN
To Next Page
Loading...
