Suzuki GSX-S1000 - Page 5

GENUINE SUZUKI ACCESSORIES
5/17
2. Slide the boot, loosen the lock-
nut of the throttle cable, and
tighten fully the adjuster. Then,
loosen the throttle cable.
3. Remove screws from the switch
box. First disconnect throttle
cable No.2, then No.1 with care,
and pull out the right side grip.
NOTE: Removed right side grip
will not be reused.
BootBoot
Lock-nutLock-nut
AdjusterAdjuster
WARNING
Do not try to wrench off the
throttle cable No.1 and No.2
forcibly by using pliers or other
tools. The throttle cable may
be bent, causing improper
return of the throttle.
Switch box
Throttle cable No.1
Throttle cable No.2
Right side grip
FWD