Suzuki GSX-S150 User Manual

IMPORTANT
BREAK-IN (RUNNING-IN) INFORMATION
FOR YOUR MOTORCYCLE
The first 1600 km are the most important in
the life of your motorcycle. Proper break-in
operation during this time will help ensure
maximum life and performance from your
new motorcycle. Suzuki parts are manufac-
tured of high quality materials, and
machined parts are finished to close toler-
ances. Proper break-in operation allows the
machined surfaces to polish each other and
mate smoothly.
Motorcycle reliability and performance
depend on special care and restraint exer-
cised during the break-in period. It is espe-
cially important that you avoid operating the
engine in a manner which could expose the
engine parts to excessive heat.
Please refer to the BREAK-IN (RUNNING-
IN) section for specific break-in recommen-
dations.

Suzuki GSX-S150 Specifications

General

Engine Type	4-Stroke, Liquid-Cooled, DOHC
Displacement	147.3 cc
Bore x Stroke	62.0 mm x 48.8 mm
Compression Ratio	11.5:1
Fuel System	Fuel injection
Starter	Electric
Transmission	6-speed constant mesh
Final Drive	Chain
Front Suspension	Telescopic, coil spring, oil damped
Front Brake	Disc
Rear Brake	Disc
Seat Height	785 mm
Rear Suspension	coil spring, oil damped
Fuel Tank Capacity	11 liters
Overall Length	2020 mm
Overall Width	745 mm
Overall Height	1040 mm
Wheelbase	1, 300 mm
Curb Weight	131 kg
Front Tire	90/80-17M/C, tubeless
Rear Tire	130/70-17M/C, tubeless

Summary

Important Information

Break-In (Running-In) Information for Your Motorcycle

Crucial first 1600 km for motorcycle life and performance.

Safety and Information Symbols

Warning Symbol

Indicates potential hazard resulting in death or serious injury.

Caution Symbol

Indicates potential hazard resulting in minor or moderate injury.

Notice Symbol

Indicates potential hazard resulting in motorcycle or equipment damage.

Controls Overview

Location of Parts

Diagrams identifying key controls and parts on the motorcycle.

Keyless Start System Operation

Details on the keyless system, remote controller, and operations.

Handlebar Controls

Explains clutch lever, headlight flasher, dimmer, turn signals, horn, engine stop, brake lever, throttle, starter.

Recommended Fluids and Fuels

Engine Oil Specifications

Details on recommended API and JASO classifications for engine oil.

Break-In and Pre-Ride Inspection

Engine and Tire Break-In Procedures

Guidelines for varying engine speed and breaking in new tires.

Pre-Ride Inspection Checks

Essential checks to perform before riding to ensure safety.

Riding Techniques and Safety

Starting the Engine and Moving Off

Procedures for starting the engine and safely beginning to ride.

Inspection and Maintenance

Maintenance Schedule and Tools

Intervals for periodic services and a list of necessary tools.

Drive Train Maintenance

Brake System Maintenance

Troubleshooting Common Issues

Fuel Supply and Ignition System Checks

Engine Stalling Diagnosis