GENUINE SUZUKI ACCESSORIES
8/17
2. Open the gap between the grip
and the handlebar with a -
driver, then inject degreasing
agent to pull out the grip.
NOTE: Removed left side grip will
not be reused.
3. Wipe off the rest of adhesive
adhered to the handlebar by
using a degreasing agent and a
waste cloth.
4. Apply cement evenly and rather
abundantly to the inside of the
Grip Heater (L) 4.
NOTICE
Use the - driver with care so
as not to scratch the surface
of the handlebar.
Handlebar
Degreasing
agent
Clean cloth
Grip cement
Grip Heater (L)
To Next Page
Loading...
